Ryo Text PlusN famille de polices


Conçue par  Ryoko Nishizuka
Ryo is a Japanese kana typeface design composed of hiragana, katakana and some punctuation marks. Available in four weights--extra light, light, regular and medium, Ryo Text has been specifically designed for use when producing text settings. Supplied in the cross-platform OpenType format, this special kana font can be used to supplement or replace the existing kana designs in existing Japanese fonts that contain full character sets. Creative professionals using the Japanese version of Adobe InDesign may use that program's Composite Font tool to easily combine Ryo Text with other typefaces.

好きなことばのカタチを造る

Les fontes d’ordinateurs de
bureau sont conçues pour être
installées sur un ordinateur et
avec des applications.
Une licence par ordinateur.
Les polices Web à la carte sont autorisées pour un certain nombre de pages vues.
La licence d’utilisation de l’application vous permet d’intégrer des polices dans vos applications. La licence peut se référer au nombre d’applications différentes ou au nombre d’installations d’une application.
Les fontes pour publications électroniques
peuvent être intégrées à un eBook, à un
e-magazine ou à un e-journal. Ces fontes
sont mises sous licence à chaque numéro.
Les fontes pour serveurs peuvent être
installées sur un serveur ou p. ex. être
utilisées par des processus automatisés
afin de créer des éléments. Chaque serveur
possède une licence valable un an.
Sélectionner le nombre d’ordinateurs
sur lesquels la fonte sera installée.
Sélectionner le nombre de pages
consultées que vous pouvez utiliser dans
le temps. Nous vous informerons lorsque
votre compte sera presque épuisé.
Sélectionnez le nombre
d’installations de l’application
pour lequel vous souhaitez
obtenir une licence. Certaines
polices d’applications permettent
un nombre d’installations illimité.
Plus d'informations
Veuillez choisir le nombre de publications
numériques dans lesquelles la fonte doit
être intégrée. Chaque licence vaut pour
un numéro et sa durée de vie.
Sélectionner le nombre de serveurs
sur lesquels la fonte sera installée.
Une licence est valable 1 an.
Nombre de pages consultées/mois :
Veuillez choisir le nombre de pages
vues espéré par mois. La licence n’a
pas besoin d’être renouvelée et a une
durée illimitée. Choisissez encore une
fois le nombre de pages consultées
supplémentaires seulement si le trafic
de votre site Internet est plus important
que prévu.
Veuillez sélectionner le nombre d’impressions publicitaires souhaitées. Nous vous informerons lorsque
votre compte sera presque épuisé.
Sélectionner le format de la
fonte: OT (OpenType) avec
Postscript outlines (OT CFF) ou
TrueType outlines (OT TTF)
Choisir la prise en charge des
langues de la fonte:
W1G (98 langues),
COM (56 langues),
PRO (33 langues) ou
STD (21 langues).
Language versions the web font is
available in. These differ in contained
characters and file size. You get all
available versions with your license.
Avec votre Webfont-License, vous obtenez toutes
les versions disponibles de cette police.
Test-drive Ryo Text PlusN Light in Typecast.

Typecast is a web-based tool to create visual and semantic designs. Check for readability, rendering and beauty then share a working prototype of your design.

Tip: Add fonts to your Favorites, then test your custom selection in Typecast!

Polices

Desktop

Web

App

ePub

Server
Les fontes d’ordinateurs de bureau sont conçues pour être installées sur un ordinateur et avec des applications. Une licence par ordinateur.
Les polices Web à la carte sont autorisées pour un certain nombre de pages vues.
Les fontes Web sont utilisées avec la règle CSS @font-face. La licence a une durée illimitée.
La licence d’utilisation de l’application vous permet d’intégrer des polices dans vos applications. La licence peut se référer au nombre d’applications différentes ou au nombre d’installations d’une application.
Les fontes pour publications électroniques peuvent être intégrées à un eBook, à un e-magazine ou à un e-journal. Ces fontes sont mises sous licence à chaque numéro.
Les fontes pour serveurs peuvent être installées sur un serveur ou p. ex. être utilisées par des processus automatisés afin de créer des éléments. Chaque serveur possède une licence valable un an.
Une licence Digital Ads vous permet d’intégrer des polices Web dans des publicités numériques, telles que les publicités HTML5. Cette licence est basée sur le nombre d’impressions publicitaires.
Ryo Text PlusN


Sélectionner le format de la
fonte: OT (OpenType) avec
Postscript outlines (OT CFF) ou
TrueType outlines (OT TTF)
world-map map Japanese map














Détails techniques
Données numériques de:
Adobe
Type de contours OpenType:
CFF - PostScript-Outlines
Noms techniques des fontes:
Nom du fichier: RyoTextPlusN-Light.otf
Nom du menu Windows: Ryo Text PlusN L
Nom PostScript: , RyoTextPlusN-Light
Nom PostScript complet: , RyoTextPlusN-Light
Numéro de catalogue:
167413814
Characters:
9499
US$ 79
Ajouter au panier

Économiser sur des formules de licence supplémentaires quand vous en achetez 2 ou plus

158 US$


118,50 US$

79 US$


79 US$


Plus d'options
Ajouter aux favoris

Caractéristiques

Langues

Standard Ligatures

Tag: liga

Fonction: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers the ligatures which the designer/manufacturer judges should be used in normal conditions. The glyph for ffl replaces the sequence of glyphs f f l.

Discretionary Ligatures

Tag: dlig

Fonction: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers those ligatures which may be used for special effect, at the user's preference. The glyph for ct replaces the sequence of glyphs c t, or U+322E (Kanji ligature for "Friday") replaces the sequence U+91D1 U+66DC U+65E5.

Slashed Zero

Tag: zero

Fonction: Some fonts contain both a default form of zero, and an alternative form which uses a diagonal slash through the counter. Especially in condensed designs, it can be difficult to distinguish between 0 and O (zero and capital O) in any situation where capitals and lining figures may be arbitrarily mixed. This feature allows the user to change from the default 0 to a slashed form. When setting labels, the user applies this feature to get the slashed 0.

Expert Forms

Tag: expt

Fonction: Like the JIS78 Forms described above, this feature replaces standard forms in Japanese fonts with corresponding forms preferred by typographers. Although most of the JIS78 substitutions are included, the expert substitution goes on to handle many more characters. The user would invoke this feature to replace kanji character U+5516 with U+555E.

Full Width

Tag: fwid

Fonction: Replaces glyphs set on other widths with glyphs set on full (usually em) widths. In a CJKV font, this may include "lower ASCII" Latin characters and various symbols. In a European font, this feature replaces proportionally-spaced glyphs with monospaced glyphs, which are generally set on widths of 0.6 em. The user may invoke this feature in a Japanese font to get full monospaced Latin glyphs instead of the corresponding proportionally-spaced versions.

Half Width

Tag: hwid

Fonction: Replaces glyphs on proportional widths, or fixed widths other than half an em, with glyphs on half-em (en) widths. Many CJKV fonts have glyphs which are set on multiple widths; this feature selects the half-em version. There are various contexts in which this is the preferred behavior, including compatibility with older desktop documents. The user may replace a proportional Latin glyph with the same character set on a half-em width.

JIS78 Forms

Tag: jp78

Fonction: This feature replaces default (JIS90) Japanese glyphs with the corresponding forms from the JIS C 6226-1978 (JIS78) specification. The user would invoke this feature to replace kanji character U+5516 with U+555E.

Proportional Widths

Tag: pwid

Fonction: Replaces glyphs set on uniform widths (typically full or half-em) with proportionally spaced glyphs. The proportional variants are often used for the Latin characters in CJKV fonts, but may also be used for Kana in Japanese fonts. The user may invoke this feature in a Japanese font to get a proportionally-spaced glyph instead of a corresponding half-width Roman glyph or a full-width Kana glyph.

Traditional Forms

Tag: trad

Fonction: Replaces 'simplified' Chinese hanzi or Japanese kanji forms with the corresponding 'traditional' forms. The user inputs U+53F0 and is offered a choice of U+6AAF, U+81FA, or U+98B1.

Vertical Writing

Tag: vert

Fonction: Replaces default forms with variants adjusted for vertical writing when in vertical writing mode. While most CJKV glyphs remain vertical when set in vertical writing mode, some take a different form (usually rotated and repositioned) for this purpose. Glyphs covered by this feature correspond to the set normally rotated in low-end DTP applications. In vertical writing mode, the opening parenthesis (U+FF08) is replaced by the rotated form (U+FE35).

Vertical Rotation

Tag: vrt2

Fonction: Replaces some fixed-width (half-, third- or quarter-width) or proportional-width glyphs (mostly Latin or katakana) with forms suitable for vertical writing (that is, rotated 90 degrees clockwise). Note that these are a superset of the glyphs covered in the vert table. ATM/NT 4.1 and the Windows 2000 OTF driver impose the following requirements for an OpenType font with CFF outlines to be used for vertical writing: the vrt2 feature must be present in the GSUB table, it must comprises a single lookup of LookupType 1 and LookupFlag 0, and the lookup must have a single subtable. The predecessor feature, vert, is ignored. A rotated glyph must be designed such that its top side bearing and vertical advance as recorded in the Vertical Metrics ('vmtx') table are identical to the left side bearing and horizontal advance, respectively, of the corresponding upright glyph as recorded in the Horizontal Metrics ('hmtx') table. (The horizontal advance of the rotated glyph may be set to any value, since the glyph is intended only for vertical writing use. The vendor may however set it to head.unitsPerEm, to prevent overlap during font proofing tests, for example.) Thus, proportional-width glyphs with rotated forms in the vrt2 feature will appear identically spaced in both vertical and horizontal writing. In order for kerning to produce identical results as well, developers must ensure that the Vertical Kerning (vkrn) feature record kern values between the rotated glyphs that are the same as kern values between their corresponding upright glyphs in the Kerning (kern) feature. Proportional- or half-width Latin and half-width katakana characters are rotated 90 degrees clockwise for vertical writing.

Alternate Half Width

Tag: halt

Fonction: Respaces glyphs designed to be set on full-em widths, fitting them onto half-em widths. This differs from hwid in that it does not substitute new glyphs. The user may invoke this feature in a CJKV font to get better fit for punctuation or symbol glyphs without disrupting the monospaced alignment.

JIS90 Forms

Tag: jp90

Fonction: This feature replaces Japanese glyphs from the JIS78 or JIS83 specifications with the corresponding forms from the JIS X 0208-1990 (JIS90) specification. The user would invoke this feature to replace kanji character U+555E with U+5516.

Kerning

Tag: kern

Fonction: Adjusts amount of space between glyphs, generally to provide optically consistent spacing between glyphs. Although a well-designed typeface has consistent inter-glyph spacing overall, some glyph combinations require adjustment for improved legibility. Besides standard adjustment in the horizontal direction, this feature can supply size-dependent kerning data via device tables, "cross-stream" kerning in the Y text direction, and adjustment of glyph placement independent of the advance adjustment. Note that this feature may apply to runs of more than two glyphs, and would not be used in monospaced fonts. Also note that this feature does not apply to text set vertically. The o is shifted closer to the T in the combination "To."

NLC Kanji Forms

Tag: nlck

Fonction: The National Language Council (NLC) of Japan has defined new glyph shapes for a number of JIS characters. The 'nlck' feature is used to access those glyphs.

Proportional Alternate Width

Tag: palt

Fonction: Respaces glyphs designed to be set on full-em widths, fitting them onto individual (more or less proportional) horizontal widths. This differs from pwid in that it does not substitute new glyphs (GPOS, not GSUB feature). The user may prefer the monospaced form, or may simply want to ensure that the glyph is well-fit and not rotated in vertical setting (Latin forms designed for proportional spacing would be rotated). The user may invoke this feature in a Japanese font to get Latin, Kanji, Kana or Symbol glyphs with the full-width design but individual metrics.

Alternate Vertical Half Metrics

Tag: vhal

Fonction: Respaces glyphs designed to be set on full-em heights, fitting them onto half-em heights. This differs from valt in that it does not substitute new glyphs. The user may invoke this feature in a CJKV font to get better fit for punctuation or symbol glyphs without disrupting the monospaced alignment.

Vertical Kerning

Tag: vkrn

Fonction: Adjusts amount of space between glyphs, generally to provide optically consistent spacing between glyphs. Although a well-designed typeface has consistent inter-glyph spacing overall, some glyph combinations require adjustment for improved legibility. Besides standard adjustment in the vertical direction, this feature can supply size-dependent kerning data via device tables, "cross-stream" kerning in the X text direction, and adjustment of glyph placement independent of the advance adjustment. Note that this feature may apply to runs of more than two glyphs, and would not be used in monospaced fonts. Also note that this feature applies only to text set vertically. When the katakana character U+30B9 or U+30D8 is followed by U+30C8 in a vertical setting, U+30C8 is shifted up to fit more evenly.

Proportional Alternate Vertical Metrics

Tag: vpal

Fonction: Respaces glyphs designed to be set on full-em heights, fitting them onto individual (more or less proportional) vertical heights. This differs from valt in that it does not substitute new glyphs (GPOS, not GSUB feature). The user may prefer the monospaced form, or may simply want to ensure that the glyph is well-fit. The user may invoke this feature in a Japanese font to get Latin, Kanji, Kana or Symbol glyphs with the full-height design but individual metrics.

These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in d

Tag: Basic Latin

Fonction: These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in different formats. Please review the product information for each font to ensure it will meet your requirements.

These fonts support the Japanese script. Each font is Unicode™ encoded, and available in different f

Tag: Japanese

Fonction: These fonts support the Japanese script. Each font is Unicode™ encoded, and available in different formats. Please review the product information for each font to ensure it will meet your requirements.

SkyFonts loading...