DF Dou Dou Traditional Chinese famille de polices


Conçue par  DynaComware Design Studio
DF Dou Dou is a Traditional Chinese font. It supports the Big-5 standard Traditional Chinese character set.

全世界的人共同分享各樣研發成果,讓國際一體化更趨成熟發展。

Les fontes d’ordinateurs de bureau sont conçues pour être installées sur un ordinateur et avec des applications. Licence par utilisateur.
Les polices web annuelles sont concédées sous licence pour un nombre déterminé de pages vues.
Les polices web annuelles sont concédées sous licence pour un nombre déterminé de pages vues.
La licence d’utilisation de l’application vous permet d’intégrer des polices dans vos applications. La licence peut se référer au nombre d’applications différentes ou au nombre d’installations d’une application.
Les polices de documents électroniques peuvent être intégrées dans un e-book, un magazine électronique ou un journal électronique. Les polices sont sous licences annuelles pour chaque publication.
Les fontes pour serveurs peuvent être installées sur un serveur ou p. ex. être utilisées par des processus automatisés afin de créer des éléments. Chaque serveur possède une licence valable un an.
Une licence Digital Ads vous permet d’intégrer des polices Web dans des publicités numériques, telles que les publicités HTML5. Cette licence est basée sur le nombre d’impressions publicitaires.
DF Dou Dou Traditional Chinese


Sélectionner le format de la
fonte: OT (OpenType) avec
Postscript outlines (OT CFF) ou
TrueType outlines (OT TTF)
world-map map TraditionalChinese map














Détails techniques
Données numériques de:
Type de contours OpenType:
CFF - PostScript-Outlines
Noms techniques des fontes:
Nom du fichier: DFDouDouHK-W5.otf
Nom du menu Windows: DFDouDouHK-W5
Nom PostScript: , DFDouDouHK-W5
Nom PostScript complet: , DFDouDouHK-W5
Numéro de catalogue:
36743263
Characters:
18846
US$ 1 000
Ajouter au panier

Caractéristiques

Langues

Discretionary Ligatures

Tag: dlig

Fonction: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers those ligatures which may be used for special effect, at the user's preference. The glyph for ct replaces the sequence of glyphs c t, or U+322E (Kanji ligature for "Friday") replaces the sequence U+91D1 U+66DC U+65E5.

Full Width

Tag: fwid

Fonction: Replaces glyphs set on other widths with glyphs set on full (usually em) widths. In a CJKV font, this may include "lower ASCII" Latin characters and various symbols. In a European font, this feature replaces proportionally-spaced glyphs with monospaced glyphs, which are generally set on widths of 0.6 em. The user may invoke this feature in a Japanese font to get full monospaced Latin glyphs instead of the corresponding proportionally-spaced versions.

Half Width

Tag: hwid

Fonction: Replaces glyphs on proportional widths, or fixed widths other than half an em, with glyphs on half-em (en) widths. Many CJKV fonts have glyphs which are set on multiple widths; this feature selects the half-em version. There are various contexts in which this is the preferred behavior, including compatibility with older desktop documents. The user may replace a proportional Latin glyph with the same character set on a half-em width.

Proportional Widths

Tag: pwid

Fonction: Replaces glyphs set on uniform widths (typically full or half-em) with proportionally spaced glyphs. The proportional variants are often used for the Latin characters in CJKV fonts, but may also be used for Kana in Japanese fonts. The user may invoke this feature in a Japanese font to get a proportionally-spaced glyph instead of a corresponding half-width Roman glyph or a full-width Kana glyph.

Vertical Writing

Tag: vert

Fonction: Replaces default forms with variants adjusted for vertical writing when in vertical writing mode. While most CJKV glyphs remain vertical when set in vertical writing mode, some take a different form (usually rotated and repositioned) for this purpose. Glyphs covered by this feature correspond to the set normally rotated in low-end DTP applications. In vertical writing mode, the opening parenthesis (U+FF08) is replaced by the rotated form (U+FE35).

Vertical Rotation

Tag: vrt2

Fonction: Replaces some fixed-width (half-, third- or quarter-width) or proportional-width glyphs (mostly Latin or katakana) with forms suitable for vertical writing (that is, rotated 90 degrees clockwise). Note that these are a superset of the glyphs covered in the vert table. ATM/NT 4.1 and the Windows 2000 OTF driver impose the following requirements for an OpenType font with CFF outlines to be used for vertical writing: the vrt2 feature must be present in the GSUB table, it must comprises a single lookup of LookupType 1 and LookupFlag 0, and the lookup must have a single subtable. The predecessor feature, vert, is ignored. A rotated glyph must be designed such that its top side bearing and vertical advance as recorded in the Vertical Metrics ('vmtx') table are identical to the left side bearing and horizontal advance, respectively, of the corresponding upright glyph as recorded in the Horizontal Metrics ('hmtx') table. (The horizontal advance of the rotated glyph may be set to any value, since the glyph is intended only for vertical writing use. The vendor may however set it to head.unitsPerEm, to prevent overlap during font proofing tests, for example.) Thus, proportional-width glyphs with rotated forms in the vrt2 feature will appear identically spaced in both vertical and horizontal writing. In order for kerning to produce identical results as well, developers must ensure that the Vertical Kerning (vkrn) feature record kern values between the rotated glyphs that are the same as kern values between their corresponding upright glyphs in the Kerning (kern) feature. Proportional- or half-width Latin and half-width katakana characters are rotated 90 degrees clockwise for vertical writing.

Glyph Composition/Decomposition

Tag: ccmp

Fonction: To minimize the number of glyph alternates, it is sometimes desired to decompose a character into two glyphs. Additionally, it may be preferable to compose two characters into a single glyph for better glyph processing. This feature permits such composition/decompostion. The feature should be processed as the first feature processed, and should be processed only when it is called. In Syriac, the character 0x0732 is a combining mark that has a dot above AND a dot below the base character. To avoid multiple glyph variants to fit all base glyphs, the character is decomposed into two glyphs...a dot above and a dot below. These two glyphs can then be correctly placed using GPOS. In Arabic it might be preferred to combine the shadda with fatha (0x0651, 0x064E) into a ligature before processing shapes. This allows the font vendor to do special handling of the mark combination when doing further processing without requiring larger contextual rules.

Alternate Annotation Forms

Tag: nalt

Fonction: Replaces default glyphs with various notational forms (e.g. glyphs placed in open or solid circles, squares, parentheses, diamonds or rounded boxes). In some cases an annotation form may already be present, but the user may want a different one. The user invokes this feature to get U+3200 (the circled form of 'ga') from U+3131 (hangul 'ga').

These fonts support the Traditional Chinese script. Each font is Unicode™ encoded, and available in

Tag: Traditional Chinese

Fonction: These fonts support the Traditional Chinese script. Each font is Unicode™ encoded, and available in different formats. Please review the product information for each font to ensure it will meet your requirements.