Chapman Familia tipográfica

Chapman is the result of spending too many hours staring at the often all-capital engraver typefaces from long-gone foundries. The wide serifs, high contrast, and various widths seem to have so much character but also remain so neutral. From these references, Chapman began to emerge. It seemed natural that the lowercase would be based on a Scotch Roman model, much like the original all-capital faces. Chapman does not pull directly from any one source but from the genres themselves. It was, from the beginning, the goal to create a typeface that would be relatively neutral but not boring; an adaptable solution that works anywhere and, depending on the chosen width, can be squeezed or stretched to fit anywhere. The idiosyncrasies of the original designs are tamed in some places and turned up in others. The result is something familiar but unique and contemporary.

Chapman Regular

Las fuentes de escritorio están
diseñadas para instalarse en un
ordenador y usarse con aplicaciones.
Licencia por usuario.
Las fuentes web de pago por uso tienen licencia para un cierto número de páginas vistas.
El licenciamiento de aplicaciones le permite incrustar fuentes en sus aplicaciones. La licencia puede referirse al número de aplicaciones diferentes o al número de instalaciones de una aplicación.
Las fuentes para documentos electrónicos
se pueden incrustar en libros, revistas y
periódicos electrónicos. Las licencias de las
fuentes son anuales y exclusivas para
cada edición de las publicaciones.
Las fuentes para servidores se pueden
instalar en un servidor y, p. ej., usarse
en procesos automáticos para crear
artículos. Cada licencia es válida para
un servidor y durante un año.
Seleccione el número de usuarios
en los que se instalará la fuente.
Seleccione la cantidad de visitas que
se pueden consumir con el tiempo.
Le avisaremos cuando se estén agotando.
Seleccione el número de instalaciones
de la App para el que desea una
licencia. Algunas fuentes de App
permiten un número ilimitado de
instalaciones. Más información
Seleccione la cantidad de documentos
electrónicos en los que desea incrustar la fuente.
Cada licencia es válida para una edición de
una publicación durante un año.
Seleccione el número de servidores
en los que se instalará la fuente.
Una licencia es válida durante 1 año.
Visitas a página/mes: indique el número
previsto de visitas mensuales. No es
necesario renovar la licencia. No caduca.
Tan sólo si recibe más tráfico en la
página web del previsto pagará de
nuevo por las visitas adicionales.
Por favor, elija el número deseado de Ad Impressions. Le avisaremos cuando se estén agotando.
Seleccione el formato técnico
de la fuente: OT (OpenType)
con perfiles Postscript (OT CFF)
o TrueType (OT TTF).
Seleccione la compatibilidad
lingüística de la fuente:
W1G (98 idiomas),
COM (56 idiomas),
PRO (33 idiomas) o
STD (21 idiomas).
Language versions the web font is
available in. These differ in contained
characters and file size. You get all
available versions with your license.
Con su Webfont-License usted obtiene todas
las versiones disponibles de esta fuente.
Test-drive Chapman Regular in Typecast.

Typecast is a web-based tool to create visual and semantic designs. Check for readability, rendering and beauty then share a working prototype of your design.

Tip: Add fonts to your Favorites, then test your custom selection in Typecast!

Fuentes

Desktop

Web

Digital Ads

Electronic Doc
Las fuentes de escritorio están diseñadas para instalarse en un ordenador y usarse con aplicaciones. Licencia por usuario.
Las fuentes web de pago por uso tienen licencia para un cierto número de páginas vistas.
Las fuentes web se usan con la regla @font-face de CSS. La licencia no tiene caducidad.
El licenciamiento de aplicaciones le permite incrustar fuentes en sus aplicaciones. La licencia puede referirse al número de aplicaciones diferentes o al número de instalaciones de una aplicación.
Las fuentes para documentos electrónicos se pueden incrustar en libros, revistas y periódicos electrónicos. Las licencias de las fuentes son anuales y exclusivas para cada edición de las publicaciones.
Las fuentes para servidores se pueden instalar en un servidor y, p. ej., usarse en procesos automáticos para crear artículos. Cada licencia es válida para un servidor y durante un año.
Una licencia de Digital Ads le permite incrustar fuentes web en anuncios digitales, como anuncios HTML5. Esta licencia se basa en el número de impresiones de anuncios.
Chapman


Seleccione el formato técnico
de la fuente: OT (OpenType)
con perfiles Postscript (OT CFF)
o TrueType (OT TTF).
world-map map

Std / OT CFF

supports at least

21 idiomas.















Detalles técnicos
Tipo de curvas OpenType:
CFF - PostScript-Outlines
Nombres técnicos de las fuentes:
Nombre del archivo: Chapman-Regular.otf
Nombre del menú Windows: Chapman
Nombre PostScript: , Chapman-Regular
Nombre PostScript completo: , Chapman Regular
Número del catálogo:
167594439
Characters:
863
US$ 40
Añadir al carrito

40 US$

40 US$

40 US$

Más opciones
Agregar a favoritos

Características

Idiomas

Case-Sensitive Forms

Etiqueta: case

Función: Shifts various punctuation marks up to a position that works better with all-capital sequences or sets of lining figures; also changes oldstyle figures to lining figures. By default, glyphs in a text face are designed to work with lowercase characters. Some characters should be shifted vertically to fit the higher visual center of all-capital or lining text. Also, lining figures are the same height (or close to it) as capitals, and fit much better with all-capital text. The user selects a block of text and applies this feature. The dashes, bracketing characters, guillemet quotes and the like shift up to match the capitals, and oldstyle figures change to lining figures.

Denominators

Etiqueta: dnom

Función: Replaces selected figures which follow a slash with denominator figures. In the string 11/17 selected by the user, the application turns the 17 into denominators when the user applies the fraction feature.

Fractions

Etiqueta: frac

Función: Replaces figures separated by a slash with 'common' (diagonal) fractions. The user enters 3/4 in a recipe and gets the threequarters fraction.

Standard Ligatures

Etiqueta: liga

Función: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers the ligatures which the designer/manufacturer judges should be used in normal conditions. The glyph for ffl replaces the sequence of glyphs f f l.

Localized Forms

Etiqueta: locl

Función: Many scripts used to write multiple languages over wide geographical areas have developed localized variant forms of specific letters, which are used by individual literary communities. For example, a number of letters in the Bulgarian and Serbian alphabets have forms distinct from their Russian counterparts and from each other. In some cases the localized form differs only subtly from the script 'norm', in others the forms are radically distinct. This feature enables localized forms of glyphs to be substituted for default forms. The user applies this feature to text to enable localized Bulgarian forms of Cyrillic letters; alternatively, the feature might enable localized Russian forms in a Bulgarian manufactured font in which the Bulgarian forms are the default characters.

Numerators

Etiqueta: numr

Función: Replaces selected figures which precede a slash with numerator figures, and replaces the typographic slash with the fraction slash. In the string 11/17 selected by the user, the application turns the 11 into numerators, and the slash into a fraction slash when the user applies the fraction feature.

Ordinals

Etiqueta: ordn

Función: Replaces default alphabetic glyphs with the corresponding ordinal forms for use after figures. One exception to the follows-a-figure rule is the numero character (U+2116), which is actually a ligature substitution, but is best accessed through this feature. The user applies this feature to turn 2.o into 2.o (abbreviation for secundo).

Proportional Figures

Etiqueta: pnum

Función: Replaces figure glyphs set on uniform (tabular) widths with corresponding glyphs set on glyph-specific (proportional) widths. Tabular widths will generally be the default, but this cannot be safely assumed. Of course this feature would not be present in monospaced designs. The user may apply this feature to get even spacing for lining figures used as dates in an all-cap headline.

Scientific Inferiors

Etiqueta: sinf

Función: Replaces lining or oldstyle figures with inferior figures (smaller glyphs which sit lower than the standard baseline, primarily for chemical or mathematical notation). May also replace lowercase characters with alphabetic inferiors. The application can use this feature to automatically access the inferior figures (more legible than scaled figures).

Superscript

Etiqueta: sups

Función: Replaces lining or oldstyle figures with superior figures (primarily for footnote indication), and replaces lowercase letters with superior letters (primarily for abbreviated French titles). The application can use this feature to automatically access the superior figures (more legible than scaled figures) for footnotes, or the user can apply it to Mssr to get the classic form.

Tabular Figures

Etiqueta: tnum

Función: Replaces figure glyphs set on proportional widths with corresponding glyphs set on uniform (tabular) widths. Tabular widths will generally be the default, but this cannot be safely assumed. Of course this feature would not be present in monospaced designs. The user may apply this feature to get oldstyle figures to align vertically in a column.

Small Capitals From Capitals

Etiqueta: c2sc

Función: Small Capitals From Capitals

Small Capitals

Etiqueta: smcp

Función: This feature turns lowercase characters into small capitals. This corresponds to the common SC font layout. It is generally used for display lines set in Large & small caps, such as titles. Forms related to small capitals, such as oldstyle figures, may be included. The user enters text as mixed capitals and lowercase, and gets Large & small cap text.

Historical Forms

Etiqueta: hist

Función: Some letterforms were in common use in the past, but appear anachronistic today. The best-known example is the long form of s; others would include the old Fraktur k. Some fonts include the historical forms as alternates, so they can be used for a 'period' effect. This feature replaces the default (current) forms with the historical alternates. While some ligatures are also used for historical effect, this feature deals only with single characters. The user applies this feature in Adobe Jenson to get the archaic forms of M, Q and Z.

Sylistic Set 1

Etiqueta: ss01

Función: In addition to, or instead of, stylistic alternatives of individual glyphs (see 'salt' feature), some fonts may contain sets of stylistic variant glyphs corresponding to portions of the character set, e.g. multiple variants for lowercase letters in a Latin font. Glyphs in stylistic sets may be designed to harmonise visually, interract in particular ways, or otherwise work together. Examples of fonts including stylistic sets are Zapfino Linotype and Adobe's Poetica. Individual features numbered sequentially with the tag name convention 'ss01' 'ss02' 'ss03' . 'ss20' provide a mechanism for glyphs in these sets to be associated via GSUB lookup indexes to default forms and to each other, and for users to select from available stylistic sets.

Glyph Composition/Decomposition

Etiqueta: ccmp

Función: To minimize the number of glyph alternates, it is sometimes desired to decompose a character into two glyphs. Additionally, it may be preferable to compose two characters into a single glyph for better glyph processing. This feature permits such composition/decompostion. The feature should be processed as the first feature processed, and should be processed only when it is called. In Syriac, the character 0x0732 is a combining mark that has a dot above AND a dot below the base character. To avoid multiple glyph variants to fit all base glyphs, the character is decomposed into two glyphs...a dot above and a dot below. These two glyphs can then be correctly placed using GPOS. In Arabic it might be preferred to combine the shadda with fatha (0x0651, 0x064E) into a ligature before processing shapes. This allows the font vendor to do special handling of the mark combination when doing further processing without requiring larger contextual rules.

Kerning

Etiqueta: kern

Función: Adjusts amount of space between glyphs, generally to provide optically consistent spacing between glyphs. Although a well-designed typeface has consistent inter-glyph spacing overall, some glyph combinations require adjustment for improved legibility. Besides standard adjustment in the horizontal direction, this feature can supply size-dependent kerning data via device tables, "cross-stream" kerning in the Y text direction, and adjustment of glyph placement independent of the advance adjustment. Note that this feature may apply to runs of more than two glyphs, and would not be used in monospaced fonts. Also note that this feature does not apply to text set vertically. The o is shifted closer to the T in the combination "To."

Mark Positioning

Etiqueta: mark

Función: Positions mark glyphs with respect to base glyphs. In the Arabic script, positioning the Hamza above the Yeh.

Mark to Mark Positioning

Etiqueta: mkmk

Función: Positions marks with respect to other marks. Required in various non-Latin scripts like Arabic. In Arabic, the ligaturised mark Ha with Hamza above it; can also be obtained by positioning these marks relative to one another.

These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in d

Etiqueta: Basic Latin

Función: These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in different formats. Please review the product information for each font to ensure it will meet your requirements.

SkyFonts loading...