Morris Sans® Familia tipográfica


Diseñado por  Dan Reynolds/2006
Morris Fuller Benton
Morris Sans is a newly revised and extended version of a small geometric family of typefaces originally produced by Morris Fuller Benton in 1930 for ATF. His initial design consisted of an alphabet of squared capital letters with a unique twist that characterized its appearance: corners with rounded exteriors and right-angle interiors. The types were intended for use in the fine print found on business cards, banking or financial forms, and contracts. But over the ensuing decades, this design became a popular element in all sorts of design environments, and several foundries revived the typeface in digital form. Since digital fonts are bicameral, with slots for both upper and lowercase letters, new cuts of the type opted filled the lowercase slots with small caps.

In 2006, Linotype commissioned its own version of the typeface-an extension for 21st century use. Under the advisement of Linotype's type director Akira Kobayashi, Dan Reynolds redrew the uppercase and added an original lowercase for the first time. Additionally, a number of extras were brought into the fonts, including six figure styles (tabular and proportional lining figures, tabular and proportional oldstyle figures, and special tabular and proportional small cap" figures). Small caps, which have become an iconic element over time, are accessible in each font as an OpenType feature. To differentiate this version from the original, Linotype's new family is named Morris Sans, in honor of Morris Fuller Benton.

All fonts in the Morris Sans family are OpenType Com fonts; they include a character set capable of setting 48 European languages that employ the Roman alphabet, including all Central and Eastern Europe languages, those from the Baltics, and Turkish. This glyph coverage extends to the small caps as well.

Morris Sans is a wide typeface, especially in its regular widths; the condensed faces set a more conventional line of text. The new lowercase letters are less geometric than the uppercase, except for those that share the same basic forms (e.g., c, o, and s). Instead of following this geometric trend, the new lowercase tends to strengthen the humanist elements that were present in several characters from the original type, including the uppercase D and the figures 5, 6, and 9. Morris Sans also sports a number of glyphic flares, like the stroke found on the original uppercase Q.

Morris Sans is a clean, modern design best suited for headlines, advertising, posters, expressive signage (especially on storefronts), and corporate identity work."

Morris Sans Heavy

Las fuentes de escritorio están diseñadas para instalarse en un ordenador y usarse con aplicaciones. Licencia por usuario.
Las fuentes web anuales se licencian por un número determinado de páginas vistas.
Las fuentes web anuales se licencian por un número determinado de páginas vistas.
El licenciamiento de aplicaciones le permite incrustar fuentes en sus aplicaciones. La licencia puede referirse al número de aplicaciones diferentes o al número de instalaciones de una aplicación.
Las fuentes para documentos electrónicos se pueden incrustar en libros, revistas y periódicos electrónicos. Las licencias de las fuentes son anuales y exclusivas para cada edición de las publicaciones.
Las fuentes para servidores se pueden instalar en un servidor y, p. ej., usarse en procesos automáticos para crear artículos. Cada licencia es válida para un servidor y durante un año.
Una licencia de Digital Ads le permite incrustar fuentes web en anuncios digitales, como anuncios HTML5. Esta licencia se basa en el número de impresiones de anuncios.
Morris Sans


Seleccione el formato técnico
de la fuente: OT (OpenType)
con perfiles Postscript (OT CFF)
o TrueType (OT TTF).
world-map map

Std / OT CFF

supports at least

21 idiomas.















Detalles técnicos
Datos digitales de:
Tipo de curvas OpenType:
CFF - PostScript-Outlines
Nombres técnicos de las fuentes:
Nombre del archivo: MorrisSansStd-Heavy.otf
Nombre del menú Windows: Morris Sans Std Light
Nombre PostScript: , MorrisSansStd-Heavy
Nombre PostScript completo: , Morris Sans Std Heavy
Número del catálogo:
167403713
Characters:
423
US$ 39.99
Añadir al carrito

Características

Idiomas

Case-Sensitive Forms

Etiqueta: case

Función: Shifts various punctuation marks up to a position that works better with all-capital sequences or sets of lining figures; also changes oldstyle figures to lining figures. By default, glyphs in a text face are designed to work with lowercase characters. Some characters should be shifted vertically to fit the higher visual center of all-capital or lining text. Also, lining figures are the same height (or close to it) as capitals, and fit much better with all-capital text. The user selects a block of text and applies this feature. The dashes, bracketing characters, guillemet quotes and the like shift up to match the capitals, and oldstyle figures change to lining figures.

Fractions

Etiqueta: frac

Función: Replaces figures separated by a slash with 'common' (diagonal) fractions. The user enters 3/4 in a recipe and gets the threequarters fraction.

Standard Ligatures

Etiqueta: liga

Función: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers the ligatures which the designer/manufacturer judges should be used in normal conditions. The glyph for ffl replaces the sequence of glyphs f f l.

Lining Figures

Etiqueta: lnum

Función: This feature changes selected figures from oldstyle to the default lining form. The user invokes this feature in order to get lining figures, which fit better with all-capital text. Various characters designed to be used with figures may also be covered by this feature. In cases where lining figures are the default form, this feature would undo previous substitutions.

Old Style Figures

Etiqueta: onum

Función: This feature changes selected figures from the default lining style to oldstyle form. The user invokes this feature to get oldstyle figures, which fit better into the flow of normal upper- and lowercase text. Various characters designed to be used with figures may also have oldstyle versions.

Ordinals

Etiqueta: ordn

Función: Replaces default alphabetic glyphs with the corresponding ordinal forms for use after figures. One exception to the follows-a-figure rule is the numero character (U+2116), which is actually a ligature substitution, but is best accessed through this feature. The user applies this feature to turn 2.o into 2.o (abbreviation for secundo).

Proportional Figures

Etiqueta: pnum

Función: Replaces figure glyphs set on uniform (tabular) widths with corresponding glyphs set on glyph-specific (proportional) widths. Tabular widths will generally be the default, but this cannot be safely assumed. Of course this feature would not be present in monospaced designs. The user may apply this feature to get even spacing for lining figures used as dates in an all-cap headline.

Superscript

Etiqueta: sups

Función: Replaces lining or oldstyle figures with superior figures (primarily for footnote indication), and replaces lowercase letters with superior letters (primarily for abbreviated French titles). The application can use this feature to automatically access the superior figures (more legible than scaled figures) for footnotes, or the user can apply it to Mssr to get the classic form.

Small Capitals From Capitals

Etiqueta: c2sc

Función: Small Capitals From Capitals

Small Capitals

Etiqueta: smcp

Función: This feature turns lowercase characters into small capitals. This corresponds to the common SC font layout. It is generally used for display lines set in Large & small caps, such as titles. Forms related to small capitals, such as oldstyle figures, may be included. The user enters text as mixed capitals and lowercase, and gets Large & small cap text.

-

Etiqueta: dpng

Ornaments

Etiqueta: ornm

Función: This is a dual-function feature, which uses two input methods to give the user access to ornament glyphs (e.g. fleurons, dingbats and border elements) in the font. One method replaces the bullet character with a selection from the full set of available ornaments; the other replaces specific "lower ASCII" characters with ornaments assigned to them. The first approach supports the general or browsing user; the second supports the power user. The user inputs qwwwwwwwwwe to form the top of a flourished box in Adobe Caslon, or inputs the bullet character, then chooses the thistle dingbat.

Discretionary Ligatures

Etiqueta: dlig

Función: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers those ligatures which may be used for special effect, at the user's preference. The glyph for ct replaces the sequence of glyphs c t, or U+322E (Kanji ligature for "Friday") replaces the sequence U+91D1 U+66DC U+65E5.

These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in d

Etiqueta: Basic Latin

Función: These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in different formats. Please review the product information for each font to ensure it will meet your requirements.