Quire Sans™ Schriftfamilie


Entworfen von  Jim Ford (2014)
Quire Sans: a universal, humanist sans serif from Jim Ford
Jim Ford has put all his experience as a font designer into the new humanist sans serif Quire Sans in order to create a perfect font. Easily legible letters with plenty of character and ten weights make this new font a true polymath.

Ford began designing Quire Sans with the intention to create nothing less than the "sans of all sans". After many years of research and experience in font design, as well as the design of countless customer fonts, Ford wanted Quire Sans to be the font he had always imagined, but never dared to start. With Quire Sans, he draws on various epochs of font design, blending Dutch, Italian, French, American and English influences with his personal style. The name itself goes far back in history: "quire" referred to a defined number of pages in medieval book production.

As a humanist sans serif, the shapes of Quire Sans are based on Renaissance Antiqua and demonstrate the typical letter forms and variations of this font genre. The "a" is open and the "g" is two story; the one-story version is included as an alternative character
.
Carefully, almost invisibly slanted terminals on the stems, legs that curve outwards slightly on the uppercase "M" and round dots take off some of the formal edge of Quire Sans and lend the font a loose, almost joyful character. Another detail supports this font personality: The diagonal arms - in "k", "A", "K" and "R", for example - are cut so as to be on a slight angle and only touch the ascender line with a point, appearing as if they were taking a step.

Ford is very careful not only with the design of the letters, but also with the selection of characters. Quire Sans has character sets with medieval and upper-case characters, aimed at table and proportional setting. Moreover, there are small caps, numerous f ligatures, an alternative &-character and the fleuron.

Each of the subtly graded weights of Quire Sans has true italic styles that draw on the Antiqua even more. Here, numerous letters have a light, curved, dynamic shape, like the "k", "v", "y" or "z", for example. The lower-case "a" changes to a closed shape, the "f" gets a descender and the "g" switches to the one-story variant - the two-story "g" is still available in the alternative characters, however.

Quire Sans lives up to its aspirations of being a good reading font (which the name itself implies). It is perfectly legible, even in the smaller sizes.

Quire Sans is more than a book font, however. With the extensive selection of weights, it is also a great font for headlines and printing jobs. Depending on the context and the weight, Quire Sans can appear subtle, robust or graceful. The font can also do well in the difficult contexts of guidance systems or newspapers. As a universal sans serif, Quire Sans is the ideal partner for large projects and corporate type.

Quire Sans Thin

Desktop-Fonts sind für die Installation auf einem Computer und die Nutzung mit Anwendungen konzipiert. Diese Fonts werden pro Computer lizenziert.
Pay-as-you-go-Webfonts sind für eine bestimmte Anzahl von Seitenaufrufen lizenziert.
Webfonts werden mit der CSS-Regel @font-face verwendet. Die Lizenz ist zeitlich unbegrenzt.
Die App-Lizenzierung ermöglicht die Einbettung von Fonts in Ihre Apps. Die Lizenz kann sich auf die Anzahl der verschiedenen Apps oder aber die Anzahl der Installationen einer App beziehen.
Electronic Publication Fonts sind für die Einbettung in eBooks, eMagazines oder eNewspapers bestimmt. Diese Fonts werden pro Ausgabe lizenziert.
Server-Fonts können auf einem Server installiert und z.B. von Prozessen zur Erstellung von Objekten verwendet werden. Eine Lizenz gilt pro Server Core CPU pro Jahr.
Eine Digital Ads-Lizenz ermöglicht es Ihnen, Webfonts in digitale Anzeigen einzubetten, wie beispielsweise in mit HTML5 erstellte Anzeigen. Diese Lizenz basiert auf der Anzahl der Ad Impressions.
Quire Sans


Wählen Sie das technische
Format und den Sprachausbau.
world-map map

Pro / OT TTF

supports at least

33 Sprachen.















Technische Details
OpenType-Kurven-Typ:
TTF - TrueType-Outlines
Technische Font-Namen:
Dateiname: QuireSansPro-Thin.ttf
Windows-Menü-Name: Quire Sans Pro Thin
PostScript-Name: , QuireSansPro-Thin
Langer PostScript-Name: , Quire Sans Pro Thin
Katalognummer:
168448812
Characters:
666
US$ 55
In den Warenkorb

Besonderheiten

Sprachen

Case-Sensitive Forms

Tag: case

Funktion: Shifts various punctuation marks up to a position that works better with all-capital sequences or sets of lining figures; also changes oldstyle figures to lining figures. By default, glyphs in a text face are designed to work with lowercase characters. Some characters should be shifted vertically to fit the higher visual center of all-capital or lining text. Also, lining figures are the same height (or close to it) as capitals, and fit much better with all-capital text. The user selects a block of text and applies this feature. The dashes, bracketing characters, guillemet quotes and the like shift up to match the capitals, and oldstyle figures change to lining figures.

Denominators

Tag: dnom

Funktion: Replaces selected figures which follow a slash with denominator figures. In the string 11/17 selected by the user, the application turns the 17 into denominators when the user applies the fraction feature.

Fractions

Tag: frac

Funktion: Replaces figures separated by a slash with 'common' (diagonal) fractions. The user enters 3/4 in a recipe and gets the threequarters fraction.

Standard Ligatures

Tag: liga

Funktion: Replaces a sequence of glyphs with a single glyph which is preferred for typographic purposes. This feature covers the ligatures which the designer/manufacturer judges should be used in normal conditions. The glyph for ffl replaces the sequence of glyphs f f l.

Lining Figures

Tag: lnum

Funktion: This feature changes selected figures from oldstyle to the default lining form. The user invokes this feature in order to get lining figures, which fit better with all-capital text. Various characters designed to be used with figures may also be covered by this feature. In cases where lining figures are the default form, this feature would undo previous substitutions.

Localized Forms

Tag: locl

Funktion: Many scripts used to write multiple languages over wide geographical areas have developed localized variant forms of specific letters, which are used by individual literary communities. For example, a number of letters in the Bulgarian and Serbian alphabets have forms distinct from their Russian counterparts and from each other. In some cases the localized form differs only subtly from the script 'norm', in others the forms are radically distinct. This feature enables localized forms of glyphs to be substituted for default forms. The user applies this feature to text to enable localized Bulgarian forms of Cyrillic letters; alternatively, the feature might enable localized Russian forms in a Bulgarian manufactured font in which the Bulgarian forms are the default characters.

Numerators

Tag: numr

Funktion: Replaces selected figures which precede a slash with numerator figures, and replaces the typographic slash with the fraction slash. In the string 11/17 selected by the user, the application turns the 11 into numerators, and the slash into a fraction slash when the user applies the fraction feature.

Old Style Figures

Tag: onum

Funktion: This feature changes selected figures from the default lining style to oldstyle form. The user invokes this feature to get oldstyle figures, which fit better into the flow of normal upper- and lowercase text. Various characters designed to be used with figures may also have oldstyle versions.

Proportional Figures

Tag: pnum

Funktion: Replaces figure glyphs set on uniform (tabular) widths with corresponding glyphs set on glyph-specific (proportional) widths. Tabular widths will generally be the default, but this cannot be safely assumed. Of course this feature would not be present in monospaced designs. The user may apply this feature to get even spacing for lining figures used as dates in an all-cap headline.

Scientific Inferiors

Tag: sinf

Funktion: Replaces lining or oldstyle figures with inferior figures (smaller glyphs which sit lower than the standard baseline, primarily for chemical or mathematical notation). May also replace lowercase characters with alphabetic inferiors. The application can use this feature to automatically access the inferior figures (more legible than scaled figures).

Superscript

Tag: sups

Funktion: Replaces lining or oldstyle figures with superior figures (primarily for footnote indication), and replaces lowercase letters with superior letters (primarily for abbreviated French titles). The application can use this feature to automatically access the superior figures (more legible than scaled figures) for footnotes, or the user can apply it to Mssr to get the classic form.

Tabular Figures

Tag: tnum

Funktion: Replaces figure glyphs set on proportional widths with corresponding glyphs set on uniform (tabular) widths. Tabular widths will generally be the default, but this cannot be safely assumed. Of course this feature would not be present in monospaced designs. The user may apply this feature to get oldstyle figures to align vertically in a column.

Contextual Alternates

Tag: calt

Funktion: In specified situations, replaces default glyphs with alternate forms which provide better joining behavior. Used in script typefaces which are designed to have some or all of their glyphs join. In Caflisch Script, o is replaced by o.alt2 when followed by an ascending letterform.

Small Capitals From Capitals

Tag: c2sc

Funktion: Small Capitals From Capitals

Small Capitals

Tag: smcp

Funktion: This feature turns lowercase characters into small capitals. This corresponds to the common SC font layout. It is generally used for display lines set in Large & small caps, such as titles. Forms related to small capitals, such as oldstyle figures, may be included. The user enters text as mixed capitals and lowercase, and gets Large & small cap text.

Stylistic Alternates

Tag: salt

Funktion: Many fonts contain alternate glyph designs for a purely esthetic effect; these don't always fit into a clear category like swash or historical. As in the case of swash glyphs, there may be more than one alternate form. This feature replaces the default forms with the stylistic alternates. The user applies this feature to Industria to get the alternate form of g.

Subscript

Tag: subs

Funktion: The "subs" feature may replace a default glyph with a subscript glyph, or it may combine a glyph substitution with positioning adjustments for proper placement. Recommended implementation: First, a single or contextual substitution lookup implements the subscript glyph (GSUB lookup type 1). Then, if the glyph needs repositioning, an application may apply a single adjustment, pair adjustment, or contextual adjustment positioning lookup to modify its position.

Sylistic Set 1

Tag: ss01

Funktion: In addition to, or instead of, stylistic alternatives of individual glyphs (see 'salt' feature), some fonts may contain sets of stylistic variant glyphs corresponding to portions of the character set, e.g. multiple variants for lowercase letters in a Latin font. Glyphs in stylistic sets may be designed to harmonise visually, interract in particular ways, or otherwise work together. Examples of fonts including stylistic sets are Zapfino Linotype and Adobe's Poetica. Individual features numbered sequentially with the tag name convention 'ss01' 'ss02' 'ss03' . 'ss20' provide a mechanism for glyphs in these sets to be associated via GSUB lookup indexes to default forms and to each other, and for users to select from available stylistic sets.

Sylistic Set 2

Tag: ss02

Funktion: In addition to, or instead of, stylistic alternatives of individual glyphs (see 'salt' feature), some fonts may contain sets of stylistic variant glyphs corresponding to portions of the character set, e.g. multiple variants for lowercase letters in a Latin font. Glyphs in stylistic sets may be designed to harmonise visually, interract in particular ways, or otherwise work together. Examples of fonts including stylistic sets are Zapfino Linotype and Adobe's Poetica. Individual features numbered sequentially with the tag name convention 'ss01' 'ss02' 'ss03' . 'ss20' provide a mechanism for glyphs in these sets to be associated via GSUB lookup indexes to default forms and to each other, and for users to select from available stylistic sets.

Sylistic Set 3

Tag: ss03

Funktion: In addition to, or instead of, stylistic alternatives of individual glyphs (see 'salt' feature), some fonts may contain sets of stylistic variant glyphs corresponding to portions of the character set, e.g. multiple variants for lowercase letters in a Latin font. Glyphs in stylistic sets may be designed to harmonise visually, interract in particular ways, or otherwise work together. Examples of fonts including stylistic sets are Zapfino Linotype and Adobe's Poetica. Individual features numbered sequentially with the tag name convention 'ss01' 'ss02' 'ss03' . 'ss20' provide a mechanism for glyphs in these sets to be associated via GSUB lookup indexes to default forms and to each other, and for users to select from available stylistic sets.

Kerning

Tag: kern

Funktion: Adjusts amount of space between glyphs, generally to provide optically consistent spacing between glyphs. Although a well-designed typeface has consistent inter-glyph spacing overall, some glyph combinations require adjustment for improved legibility. Besides standard adjustment in the horizontal direction, this feature can supply size-dependent kerning data via device tables, "cross-stream" kerning in the Y text direction, and adjustment of glyph placement independent of the advance adjustment. Note that this feature may apply to runs of more than two glyphs, and would not be used in monospaced fonts. Also note that this feature does not apply to text set vertically. The o is shifted closer to the T in the combination "To."

These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in d

Tag: Basic Latin

Funktion: These fonts support the Basic Latin character set. Each font is Unicode™ encoded, and available in different formats. Please review the product information for each font to ensure it will meet your requirements.

These fonts support the Latin Extended character set. Each font is Unicode™ encoded, and available i

Tag: Latin Extended

Funktion: These fonts support the Latin Extended character set. Each font is Unicode™ encoded, and available in different formats. Please review the product information for each font to ensure it will meet your requirements.

-

Tag: Screen optimized